Fluke 725, Multifunction Process Calibrator

The Fluke 725 Multifunction Process Calibrator equips you to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.

Do you need to calibrate transmitters? The Fluke 725 split display lets you view input and output values simultaneously. For valve and I/P tests, you can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.

From the moment you pick it up, the Fluke 725 process calibrator is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.

Key features of the Fluke 725 process calibrator are:

• Two separate channels enables you to measure, source and view process signals simultaneously
• Measure volts, mA, RTDs, thermocouples, frequency and resistance to test sensors and transmitters
• Source / simulate volts, mA, thermocouples, RTDs, frequency and pressure to calibrate transmitters
• Measure or source pressure using any of 29 Fluke 700Pxx pressure modules
• Source mA with simultaneous pressure measurement to conduct valve and I/P tests
• Perform fast linearity tests with auto step and auto ramp features
• Power transmitters during test using 24V loop supply and simultaneous mA measurement
• Store frequently-used test setups for later use