This model has been replaced by the newer Fluke 1662, that adds on / off switchable auto-start for RCD & looptest and a heavy duty, single input line cord accessory.
The Fluke 1652C offer includes the Fluke 323, 400A AC Clamp Meter. The tester comes complete with 3 way fused test leads, mains test lead, zero adaptor, AA batteries, remote switch probe & hard carry case.
The Fluke 1652C will perform the following tests:
Insulation Test & Continuity Test
Three ranges available (250, 500 & 1000V), with a lead zero function for ensuring lead resistance is not included in the reading. Lead null results are stored in the tester, so no need to keep zeroing before each test.
Earth Loop Impedance Test
High current and non-trip loop tests are available on this unit, catering for both domestic and industrial requirements.
RCD Test
The 1652C has features the time-saving auto RCD test, as well as the diagnostic ramp test. Standard trip time tests are available at 1/2I, 1I and 5I (0° and 180°), on 10mA to 1000mA RCDs.
Voltage Test
Test voltage up to 500V.
Battery Test
A battery test is included so you know when to replace them. Low batteries can cause problems, including problems with zeroing the leads or performing continuity tests.
Phase Rotation
Carry out a phase rotation test without the need for an additional instrument.
Warranty
The Fluke 1652C is covered by a 3 year manufacturers warranty.
Where a tester is offered with a free manufacturers calibration certificate, this is issued at the time of manufacture and is valid from the date the equipment is commisioned into use. We offer an option of having the unit calibrated on the day of purchase for those who require it, and as such is charged at the rate shown.
