Free Delivery

90-day Returns

Technical Support

Fluke 1664FC with EV Adaptor Test Kit (FEV300-KIT)

Fluke
  • Safely test the PE conductor for possible presence of dangerous voltage against earth
  • Simulate various current capabilities of charging cables
  • Simulate vehicle charging states
  • Simulate PE error (Earth fault)
  • Includes Fluke 1664 FC to perform installation tests and Type 2 connector
Regular Price £3,018.00 Special Price £1,582.80 £1,319.00

Availability: Usually 1-2 weeks

Product Code
FLUFEV300-KIT

Complete EV Charge Point Installation Test Kit

The Fluke FEV300 with 1664 FC Multifunction Installation Tester is a complete kit designed to test the function and safety of charging stations mode 3 for AC charging. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with the Fluke 1664 FC installation tester to quickly and efficiently test to all local regulations without opening the charging station. Use the FEV300 to verify a charging station is working properly after install, during periodic maintenance or troubleshoot a charging station if it is not delivering the appropriate charge. With the adapter kit, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722.

Run seven installation tests in one sequence

The FEV300 PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal. Connect the 1664 FC to the FEV300 to run seven installation tests automatically in one sequence through a single connection. The 1664 FC tests to all local regulations and allows you to share test results in real time over your smartphone via Fluke Connect Measurements.

Safety, simplicity and convenience

Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all in one adapter that safely integrates with the Fluke portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for charging station troubleshooting: the FEV300 adapter acts as an electric vehicle when connected to a charging station for easy performance and maintenance testing.

PE Pre-Test: Safely pre-test the PE conductor for possible presence of dangerous voltage against earth

  • Proximity Pilot (PP) state “Cable Simulation”: The PP State rotary switch enables the adapter to simulate various current capabilities of charging cables
  • Control Pilot (CP) state “Vehicle Simulation”: Use the CP State rotary switch selector to simulate various charging states
  • Simulation of CP error & Simulate PE error (Earth fault)
More Information
ManufacturerFluke
Manufacturer Part Number5363606
GTIN0195112050347
Earth testYes
Type B RCD testYes
Write Your Own Review
You're reviewing:Fluke 1664FC with EV Adaptor Test Kit (FEV300-KIT)
Your Rating
We found other products you might like!