Amprobe LAN-1 - LAN Cable Tester

£118.80 £99.00

Availability: Limited stock

Ships Monday, December 12 if ordered in the next 2 days, 4 hours and 1 minutes!

Product Code

The LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go / no-go LED display of the wiring and connection of item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display the results.


  • Testing wiring faults of LAN cables
  • Detection of cable breaks, short circuits, reversed and split pairs
  • Check of shielding

Product information:

  • Test pin configuration for:
    • 10/100 base
    • 10 base-2 cables
    • RJ45 cables
    • AT&T 258A cables
    • EIA / TIA 568A/568B cables
    • Token ring cables
  • Testing installed cable on wall plate or the patch panels by using an external coding plug
  • Testing a cable loop or remote testing with a coding plug
  • Acoustic error display

Product highlights:

  • Automatic and manual test procedure
  • Recognition of split pairs

More Information
Manufacturer Part Number3052401
Write Your Own Review
You're reviewing:Amprobe LAN-1 - LAN Cable Tester
Your Rating

Cable types tested 10/100 base-T; 10 base-2; RJ45; AT&T 258A; EIA / TIA 568A/568B; Token Ring

Continuity maximum length > 300 meters

Connector types RJ45, BNC

Display: 18 LEDs: 9 red and 9 green, 9 LEDs on remote module

Battery: Standard 9-volt battery, NEDA 1604A, JIS 006P, IEC 6F22

Low battery indicator: The LED indicator will not turn on when BATT button is pushed

Operating environment: 0 to 40°C (32 to 104°F), 10 to 70% RH