by Mark Fuller | 1st Sep, 2015 | Installation testing
Health & Safety Executive GS38 guidance note is aimed at people (including electricians, electrical contractors, test supervisors, technicians, managers, tradespeople and/or appliance retailers/repairers etc) who use electrical test equipment on low voltage...
by Mark Fuller | 19th Jun, 2015 | Thermal / Acousting Imaging
1. Misinterpreting reflections In the visible world, we see reflections from many surfaces, the most common example is with a mirror. Reflections also happen in the world of Infrared Radiation. Polished and shiny surfaces, metals being the best example, will often...
by Mark Fuller | 2nd Jun, 2015 | Frequently Asked Questions
When it comes to buying new test equipment, you’ll go through several processes. These can include choosing from your favoured brand, buying on specification or maybe price will be an influencing factor. One area that can often be overlooked is the warranty....
by Mark Fuller | 13th Jan, 2015 | Installation testing
January 2015 saw the introduction of the 3rd amendment to the 17th Edition wiring regulations. Part of the 3rd amendment sees new limits introduced for earth loop testing. To coincide with this change, Martindale Electric launched two new multifunction testers: the...
by Mark Fuller | 1st Jan, 2015 | Installation testing
It’s a lot more than just a colour change to the front cover. You will easily be able to spot the third amendment to BS7671:2008 IET Wiring Regulations from the bright yellow cover, but how will what’s inside impact electrical installation testing? The new...
