Megger MIT2500 - Insulation Tester (2.5kV)
Megger
- 2500V Insulation Tester for motor and cable testing
- Includes FREE manufacturer calibration certificate
£954.00 £795.00
Availability: Usually 1-3 weeks
Product Code
MEGMIT2500
The Megger MIT2500 2.5kV insulation and continuity tester has been designed for motor and cable testing, specialist applications and electrical testing applications, where operation voltages exceed 1000 V and higher insulation test voltages are needed.
The MIT2500 offers both fixed range voltages of 50 V, 100V, 250 V, 500 V, 1000 V and 2500 V, as well as a variable range that allows any voltage between 50 V and 2500 V to be “dialled in”. This is supported by the new test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under test.
Key Features:
- Insulation testing up to 2.5 kV and 200 GΩ range in a hand held instrument
- Guard terminal for high resistance accuracy
- Adjustable insulation test voltage from 50 V to 2500 V
- Stabilised insulation test voltage
- Rechargeable options for mains and car charging
- Single range, faster continuity testing from 0.01 Ω to 1 MΩ
- Polarisation Index (PI) & Dielectric Absorption Ratio (DAR)
- CAT IV 600 V applications
Note: The free manufacturer calibration certificate is issued on the date of manufacture. If you require a personalised or independently tested certificate issued on the date of purchase, please select the relevant calibration option above.
Write Your Own Review
Technical Specifications
| Insulation | |
|---|---|
| Insulation Accuracy | 50 Volts: 10 GΩ ± 2% ± 2 digits ± 4.0% per GΩ 100 Volts: 20 GΩ ± 2% ± 2 digits ± 2.0% per GΩ 250 Volts: 50 GΩ ± 2% ± 2 digits ± 0.8% per GΩ 500 Volts: 100 GΩ ± 2% ± 2 digits ± 0.4% per GΩ 1000 Volts: 200 GΩ ± 2% ± 2 digits ± 0.2% per GΩ 2500 Volts: 200 GΩ ± 2% ± 2 digits ± 0.2% per GΩ Service Error: BS EN 61557-2 (2007). 50V: ± 2.0% ± 2d, 100kΩ - 900kΩ ± 10.5% 100V: ± 2.0% ± 2d, 100kΩ - 900kΩ ± 10.3% 250V: ± 2.0% ± 2d, 100kΩ - 900kΩ ± 10.3% 500V: ± 2.0% ± 2d, 100kΩ - 900kΩ ± 10.3% 1000V: ± 2.0% ± 2d, 100kΩ - 900kΩ ± 11.5% |
| Guard Terminal Performance | <5% erros on 500kΩ parallel circuit resistance with 100MΩ load |
| Display Range | Analogue: 1GΩ full scale |
| Short Circuit/Charge Current | 2mA +0 to -50% t EN 61557-2 (2007) (except 2500V) |
| Terminal Voltage Accuracy | -0 +2% ±2V |
| Test Current | 1mA at minimum pass values of insulation to a maximum of 2mA max |
| Operation | EN61557: 0.10MΩ to 1.0GΩ |
| Leakage Current Display | 10% ±3 digits |
| Voltage | ±3% ±2 digits ±0.5% of rated voltage |
| Timer Control | Countdown timer 60 seconds (adjustable to 10 minutes) |
| Note | Above specs only apply when high quality silicone leads are used |
| Continuity | |
| Continuity Measurement | 0.01Ω to 1MΩ (0 to 1000kΩ on analogue scale) |
| Continuity Accuracy | ± 3% ± 2 digits (0 to 100 Ω ) ± 5% ± 2 digits (100 Ω - 500 k Ω) Service Error: BS EN 61557-4 (2007) - ± 2.0%, 0.1Ω - 2Ω ± 6.8% |
| Open Circuit Voltage | 5V ±1V |
| Test Current | 200mA (-0mA to +20mA) (0.01Ω to 4Ω) |
| Polarity | Single polarity (default) / dual polarity (configurable on setup) |
| Lead Resistance | Null Up to 10Ω |
| Voltage | |
| Voltage Range | DC: 0 to 600V AC: 10mV to 600V TRMS sinusoidal (15Hz to 400HZ) Unspecified: 0 to 10mV (15 to 400Hz) |
| Voltage Range Accuracy | DC: ±2% ±2 digits AC: ±2% ±2 digits Service Errors: BS EN 61557-1 (2007) - ±2.0% ±2d. 0V to 300V AC/DC ±5.1% |
| Waveform | Non-sinusoidal: ± 3% ± 2 digits >100 mV to 600 V TRMS ± 8% ± 2 digits 10 mV to 100 mV TRMS |
| Frequency | |
| Measurement Range | 15 to 400Hz |
| Accuracy | ±0.5% ± 1 digit |
| Capacitance | |
| Range | 0.1nF to 10μF |
| Accuracy | ±5.0% ±2 digits (1nf to 10μF) |
| General Specifications | |
| Storage Capacity | >1000 test results |
| Data Download | Bluetooth wireless Bluetooth class II |
| Range | Up to 10m |
| Power Supply | 6 x 1.5V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) alkaline 6 x 1.2 NiMH rechargeable cells may be used |
| Battery Life | 3000 insulation tests with duty cycle of 5 sec ON/55 sec OFF @ 1000V into 1MΩ Charger (optional) 12-15V DC (accessory interface) |
| Dimensions | 228 x 108 x 63mm |
| Weight | 815g |
| Fuse | Use only 2 x 500mA (FF) 1000V 32 x 6mm ceramic fuse of high breaking capacity HBC 30kA minimu, Glass fuses MUST NOT BE FITTED |
| Safety Protection | Meets EN 61010-1 (1995) to 600V phase to earth, Category IV. Refer to safety warnings supplied |
| EMC | In accordance with IEC 61326 including amendment No 1 |
| Temperature Coefficient | <0,1% per °C up to 1 GΩ <0,1% per °C per GΩ above 1 GΩ |
| Operating Temperature Range | -10 to +55°C |
| Storage Temperature Range | -25 to +70°C |
| Humidity | 90% RH at 40°C max |
| Calibration Temperature | +20°C |
| Maximum Alititude | 2000m |
| IP Rating | IP54 |
- Megger MIT2500 2.5kV Insulation Tester
- Red/Black/Blue silicone test leads with prods and clips
- 2.5 kV Red/Black/Blue silicone test leads with clips
- Owner’s Information CD
- Batteries 6 x AA Alkaline
- Carry Case
- Manufacturer Calibration Certificate
We found other products you might like!
Related Products
Check items to add to the cart or
