Instrotech Code: AMPKIT17B - £596.25
The Robin KIT-17B includes the KMP7036 insulation tester, KMP7021 RCD tester and KMP7030 earth loop tester. The kit is supplied in a soft carry case for easy transportation and comes supplied with a full set of leads, manuals, calibration certificates and batteries.
Features of the Robin KMP7036
Tests insulation of wires, cables, transformers and electrical motors
Selectable test voltages 250V, 500V and 1000V
Test button hold to perform the Dielectric Absorption Ratio Test
Continuity test @ 200mA short-circuit
Designed to allow testing to BS7671 IEE 17th Edition regulations
Built in voltmeter and red light warning for live circuit indication
Large, backlit display
Automatic discharge of test object after completion of measurement
Data Hold
Test lead resistance zero facility
Low battery indication
Safety CAT III 600V
Features of the Robin KMP7021
Three levels of trip currents (X1/2, X1, X5) for complete range of testing applications
Ramp test
3-LED proper connection indicator
Phase switch selection 0° and 180° for positive and negative
semi-cycle testing
Designed to allow testing to BS7671 IEE 17th Edition regulations
Large display
Features of the Robin KMP7030
Non trip loop test on passive RCDs
Instant reading
20, 200 & 2000Ω loop measurement ranges
PSC measurement up to 20kA
Displays mains voltage before test
Instant correct wiring status check
Designed to allow testing to BS7671 IEE 17th Edition regulations
Backlight display
Low battery indication
CAT III 300V
Specification
Robin KMP7036 Specification
Display
LCD
Insulation Resistance
0.00MΩ ~ 4.99MΩ
5.0MΩ ~ 49.9MΩ
50MΩ ~ 999MΩ
1.00GΩ ~ 1.99GΩ
Test Voltage
250V / 500V / 1000V
Test Current
≥1mA
Voltage Measurement
30V...750V AC
Low Ohm Measurement
0.00Ω ~ 200Ω
Test Current
≥200mA
Test Voltage
5V DC
Safety
Complying with IEC 61010/EN 61010, BS7671 IEE 17th Edition regulations
Overvoltage category
CAT III 600V
Pollution Degree
2
Power Supply
6 x 1.5 V (AA)
Dimensions
160 x 101 x 71 mm
Weight
Approx. 600g
Robin KMP7021 Specification
Display
LCD
Nominal Test Current
10 / 20 / 30 / 100 / 300 / 500mA
RCD Trip Time
0...1999 ms
Tolerance
±(2%+2 Digits)
Test Current Type
AC
Mains Voltage
195 – 253 V AC
Safety Compliance
IEC61010/EN61010, BS7671 IEE 17th Edition regulations
Overvoltage category
CAT III 300V
Pollution Degree
2
Protection Degree
IP40
Power Supply
AC mains 230V +10% -15%, 50 Hz
Dimensions
160 x 101 x 71 mm
Weight
Approx. 450g
Robin KMP7030 Specification
Display
LCD
Loop Resistance
0...19.99Ω
199.9Ω
1999Ω
Short circuit current
0.0 ~ 199.9A
1999A
19.9kA
Voltage
230V AC (+10% to -15%)
Mains Frequency
45Hz...65 Hz
Safety
Complying with IEC61010/EN61010, BS7671 IEE 17th Edition regulations
Overvoltage category
CAT III / 300 V
Pollution Degree
2
Protection Degree
IP40
Power Supply
8 x 1.5V AA Alkaline Batteries
Dimensions
189 x 168 x 85 mm
Weight
Approx. 1.1kg (with batteries installed)
