Product Details
An excellent, low volume, budget PAT tester. Training course included.
The Martindale HPAT500 is a unique PAT tester, with a simple one-button operation for testing Class I, Class II, mains leads and extension leads. Unlike similar PAT testers, the HPAT500 has a unique feature to counteract issues with testing appliances with long leads, or long extension leads, caused by the extra resistance added as a result of the lead length. Where the test result may go over the pre-programmed 0.1Ω threshold (up to 0.2Ω), the display will indicate this, allowing the user to verify the result against the table published in the IEE Code of Practice.
A simple, fast solution to portable appliance testing. This battery operated PAT tester is suitable for small schools, small contractors and general in-house PAT testing requirements.
Carrying out earth bond tests on IT equipment with the Martindale HPAT500
The design of the Martindale HPAT500 portable appliance tester means that there is no need for a separate test process for IT equipment. The earth bond current is only 200mA, as recommended in the IEE Code of Practice, meaning that whether testing standard appliances, or IT equipment, using the Class I test button will perform the required tests.
Another unique feature of the HPAT500 is the in-situ battery charger, no need for separate accessories.
The Martindale HPAT500 portable appliance tester is supplied with:
Earth Bond Probe with Croc Clip
6 x 1800mAh NiMH Rechargeable Batteries
Mains Battery Charging Adaptor
240V Extension Lead Adaptor
Soft Carry Case with Strap
Printed Instruction Manual
1000 PASS Labels
500 FAIL Labels
Specfication
Earth Bond Test (IT Safe)
Test Current: 200mA DC
Test Voltage: 4V DC
Pass Value: 0.1Ω
Insulation Resistance
Test Voltage: >500V DC at 1mA
Display Range: 0.20Megohm - 19.99Megohm
Pass Value: 1Megohm Class I, 2Megohm Class II
IEC & Extension Lead Test
Earth Continuity: 200mA DC
Insulation Test: 500V DC
Wiring Test: Live, Neutral Continuity& Polarity
Fuse Test
Test Voltage: 4V DC
Test Current: 200mA DC
Pass Level: >2mA
SEARCH: 
