Product Details
A simple, fast solution to PAT testing. Battery operated and suitable for small schools, small contractors and general in-house testing requirements.
The HPAT500 is a unique tester, with a simple one-button operation for testing Class I, Class II and Mains Leads. Unlike similar testers, the HPAT500 has a unique feature to counteract issues with testing appliances with long leads, or long extension leads. Where the test may go over the pre-programmed 0.1Ω threshold (up to 0.2Ω), the display will indicate this, allowing the user to verify the result against the table published in the IEE Code of Practice.
FREE with this product - 1000 Pass Labels & 500 Fail Labels
Another unique feature of the HPAT500 is the in-situ battery charger, no need for separate accessories.
The HPAT500 is supplied with:
- Earth Bond Probe with Croc Clip
- 6 x 1800mAh NiMH Rechargeable Batteries
- Mains Battery Charging Adaptor
- 240V Extension Lead Adaptor
- Soft Carry Case with Strap
- Printed Instruction Manual
- 1000 PASS Labels
- 500 FAIL Labels
Technical Data
Earth Bond Test (IT Safe)
Test Current: 200mA DC
Test Voltage: 4V DC
Default Pass Value: 0.1Ω
Secondary Pass Value: 0.2Ω
Insulation Resistance
Test Voltage: >500V DC at 1mA
Display Range: 0.20Megohm - 19.99Megohm
Pass Value: 1Megohm Class I, 2Megohm Class II
IEC & Extension Lead Test
Earth Continuity: 200mA DC
Insulation Test: 500V DC
Wiring Test: Live, Neutral Continuity& Polarity
Fuse Test
Test Voltage: 4V DC
Test Current: 200mA DC
Pass Level: >2mA
SEARCH: 
