The Series 3000 is a digital thermometer of very high accuracy (0.01 °C) and very high resolution (0.001 °C) at an economical price. To ensure that the very best measurements are achieved, PRT probe characteristics may be entered and stored using either CVd or ITS90 coefficients. The measuring current may be reduced by 0.707 to determine self-heating of the probe and may also be reversed automatically to optimise any thermal emf errors.
It comes with many options. 2 channel inputs which enable you to compare thermocouples directly against a standard PRT (platinum resistance thermometers). This is ideal for those wishing to calibrate thermocouples. It also lets you measure or calibrate any mix of probe types (Pt25/Pt100/Thermocouple, RTD/RTD, Thermocouple / Thermocouple) and display A, B or A-B on a large LCD Graphics Panel (240x64 Dot, LED back light contrast control via keyboard). The Series 3000 is linearised for 13 thermocouples Pt25 and Pt100: the choice of which to display is yours.
It can be incorporated into automated measuring systems thanks to the RS232/IEEE-488 optional interfaces, and provides a maths functions to enable the statistical analysis of stored or filtered values to be displayed (mean, max/min, peak values, standard deviations). You do not need a separate data logger. The display may also be set to display the rolling average value and standard deviation.
Sold as standard with a data logging function with memory for 4000 single channel readings with date and time (2000 dual channel). The stored values can be recalled to the instrument display and scrolled through using the keyboard or can be downloaded to a PC file or printer.
Giving approximately 8 hours of continuous operation thanks to the rechargeable sealed lead acid battery, a mains internal charger is also built in for added convenience and flexibility. It is very ruggedly constructed and housed in an aluminium case for maximum safety.
Dedicated front panel keys for the most commonly used functions and menus for the enhanced features, the unit also offers digital calibration with pass code entry for optimum security.
A scanner (optional) can be fitted to a slot in the rear panel. Two types are available for thermocouple or RTD scanning. Two scanner cards may be fitted per instrument, each card has 4 channels, the front input sockets are also available giving up to a maximum of 10 channels. There is no reduction in accuracy performance when the scanner cards are used.
There are 3 models available in this range, please select the required option from the drop-down box above:
Cropico 3000
- Accuracy of RTD measurement 0.01°C
- Accuracy of T/C measurement 0.1°C
- 1 milli kelvin resolution for RTDs
- 10 milli kelvin resolution for T/C
- Suitable for Pt25 & Pt100 sensors, -200°C to +670°C
- 2 measuring inputs
- 10 Thermocouples B, E, J, K, N, R, S, T, D, C
- T/C reference junction internal or external
- Input of RTD characteristics
- Probe self-heat check
- Automatic current reversal for RTDs
- Suitable for 3 & 4 wire RTDs
- Units °C, °F, °K, mV or ohm
- Maths function max / min std. deviation
- Data logging 4000 values
- Digital calibration
- Rechargeable sealed lead acid battery
Cropico 3001
- Accuracy of RTD measurement 0.01°C
- Accuracy of T/C measurement 0.1°C
- 1 milli kelvin resolution for RTDs
- 10 milli kelvin resolution for T/C
- Suitable for Pt100 sensors, -200°C to +800°C
- 2 measuring inputs
- 10 Thermocouples B, E, J, K, N, R, S, T, D, C
- T/C reference junction internal or external
- Input of RTD characteristics
- Probe self-heat check
- Automatic current reversal for RTDs
- Suitable for 3 & 4 wire RTDs
- Units °C, °F, °K, mV or ohm
- Maths function max / min std. deviation
- Data logging 4000 values
- Digital calibration
- Rechargeable sealed lead acid battery
Cropico 3002
- Accuracy of RTD measurement 0.01°C
- 1 milli kelvin resolution for RTDs
- Suitable for Pt100 sensors, -200°C to +800°C
- 2 measuring inputs
- Input of RTD characteristics
- Probe self-heat check
- Automatic current reversal for RTDs
- Suitable for 3 & 4 wire RTDs
- Units °C, °F, °K or ohm
- Maths function max / min std. deviation
- Data logging 4000 values
- Digital calibration
- Rechargeable sealed lead acid battery
